Independently researched Settings Guide
Nokta Legend 2 Gold Settings
Gold Field is for natural nuggets in mineralized ground; Park or Beach is usually more rational for rings and chains in trash or salt.
Bottom line
Separate nugget prospecting from jewelry hunting before touching settings
For nuggets, begin Gold Field in the recommended multifrequency profile, balance on clean ground and use a stable threshold/sensitivity. For jewelry, use Park or Beach and keep low conductors open.
Field guide
Starting points and hard limits
| Situation | Baseline | Action | Caution |
|---|---|---|---|
| Small nuggets, mild ground | Gold Field / SMF | Stable threshold | Use small coil if available |
| Mineralized variable ground | Gold Field / SMF | Tracking/manual GB as tested | Hot rocks remain possible |
| Park jewelry | Park / SMF | Open low conductors | Foil/tab overlap |
| Wet-salt jewelry | Beach / SMF | Salt-stable sensitivity | Do not use Gold Field blindly |
Method
Use a controlled workflow
Define the target
Natural nuggets and jewelry require different audio and discrimination.
Select the correct mode
Gold Field for prospecting; Park/Beach for jewelry sites.
Balance and stabilize
Ground balance, interference cancel and set a usable threshold.
Retest hot rocks
Change ground suppressor or filters only against real samples.
Decision analysis
What actually changes the result
Gold Field does not mean every gold object. It uses prospecting-oriented audio and ground behavior that becomes inefficient in modern trash.
Ground suppression is not free depth. Stronger filtering can tame hot-rock response while also weakening marginal nuggets.
Threshold must remain informative. A loud or unstable baseline masks the tiny changes the mode is designed to expose.
FAQ
Seven questions specific to this page
Which Legend 2 mode is best for natural gold?
Gold Field is the prospecting mode; begin with its factory SMF setup.
Is Gold Field best for gold rings in parks?
No. Park mode provides more practical discrimination and target categorization.
What mode should I use for jewelry on wet salt sand?
Beach mode with simultaneous multifrequency and stable sensitivity.
Should ground tracking always be enabled?
Use it where ground changes enough to justify it, then verify weak targets are not being reduced.
How loud should the threshold be?
Barely audible and stable enough that small rises and breaks remain clear.
Should I maximize sensitivity for tiny nuggets?
No. Use the highest stable level; excessive ground noise can hide weak gold.
Can I copy original Legend Gold Field settings?
Not blindly. Legend 2 is a different 99-ID platform with revised controls and behavior.
Continue researching
Related detector guides
Metal Detector Settings & Target ID Guides
Continue with the related guide and compare the equipment for your terrain and targets.
Metal Detecting Guides for Beginners
Continue with the related guide and compare the equipment for your terrain and targets.
Metal Detector Comparisons
Continue with the related guide and compare the equipment for your terrain and targets.
XP Deus II Settings and Target ID Guide
Continue with the related guide and compare the equipment for your terrain and targets.
Use evidence, not copied numbers
Record the detector, firmware, mode, coil and conditions behind every useful result.
Check Prices