Independently researched Settings Guide
Nokta Legend Gold Settings
Original Legend Gold Field settings depend on nugget ground, while jewelry belongs in Park or Beach. Current V1.17 controls include Gold Stability and Audio Gain.
Bottom line
Use Gold Field for nuggets; use site modes for jewelry
Begin Gold Field in multifrequency, ground balance, establish a stable threshold and sensitivity, then adjust Audio Gain or Gold Stability only to solve a specific weak-audio or ground-noise problem.
Field guide
Starting points and hard limits
| Situation | Baseline | Action | Caution |
|---|---|---|---|
| Mild nugget ground | Gold Field / Multi | Stable sensitivity | Small coil favors separation |
| Difficult hot-rock ground | Gold Field / Multi | Test GS incrementally | Filtering can cost weak gold |
| Park jewelry | Park / Multi | Accept low conductors | Expect foil |
| Wet-salt jewelry | Beach / Multi | Salt-stable setup | Gold Field is not the default |
Method
Use a controlled workflow
Name the gold goal
Nuggets require Gold Field; rings require the site mode.
Balance carefully
Use clean ground and retest as mineralization changes.
Set threshold/sensitivity
Keep the baseline audible but calm.
Apply GS sparingly
Gold Stability can control noise but may suppress marginal responses.
Decision analysis
What actually changes the result
Software updates matter. Gold Stability and Audio Gain guidance must match the installed firmware; Nokta lists V1.17 documentation.
Audio Gain changes audibility, not transmitted depth. High gain can flatten shallow/deep sound differences and amplify noise.
Gold Stability is a tradeoff control. Use the lowest value that makes difficult ground interpretable while preserving test-target response.
FAQ
Seven questions specific to this page
What mode should original Legend use for nuggets?
Gold Field with multifrequency is the starting point.
What is Gold Stability?
A Gold Field control intended to improve stability; higher values may also reduce marginal signals.
Does Audio Gain add detection depth?
No. It amplifies weak received audio and can also amplify noise.
Is Gold Field correct for beach rings?
No. Use Beach mode for conductive salt and accept jewelry-range targets.
What threshold level is best?
A barely audible stable level that preserves faint rises or interruptions.
Should ground tracking remain on?
Use it when variable mineralization requires it, while checking that tiny targets remain audible.
Can Legend 2 gold settings be copied?
No. Legend 2 is a separate detector with different ID scale and controls.
Continue researching
Related detector guides
Metal Detector Settings & Target ID Guides
Continue with the related guide and compare the equipment for your terrain and targets.
Metal Detecting Guides for Beginners
Continue with the related guide and compare the equipment for your terrain and targets.
Metal Detector Comparisons
Continue with the related guide and compare the equipment for your terrain and targets.
Nokta Legend 2 Settings and Target ID Guide
Continue with the related guide and compare the equipment for your terrain and targets.
Use evidence, not copied numbers
Record the detector, firmware, mode, coil and conditions behind every useful result.
Check Prices